Inhalt

Magirus Pump Series

With the introduction of the new pump generation we continue the tradition of the Magirus pump technology at the highest level. From light and standard fire fighting vehicles to air crash tenders, all configurations o fire fighting vehicles can be optimally equipped. Robustness, maximum reliability and excellent quiet running properties characterise the new pumps.

The Magirus fire-fighting centrifugal pumps are available in two different versions: As MPN (Magirus Pump Normal pressure) or MPH (Magirus Pumps High pressure).

MPN - Normal pressure

  • MPN 120 (Alu) - DIN EN 1028

    MPN 120 (Alu) - DIN EN 1028

    Available for standard vehicles like e.g. KLF, TSF-W, LF-HLF 10
    Max. delivery capacity: 2,300 l/min
    at 8 bar / 3 m geodetic suction
    Suction Inlet diameter of 110 mm
    Priming system: Magirus Primatic
    Weight: 52 kg
    fitted into the vehicle complete with inputs and outputs approx. 92 kg
  • MPN 230 (Alu) - DIN EN 1028

    MPN 230 (Alu) - DIN EN 1028

    Available for standard vehicles like e.g. LF-HLF 20 or TLF
    Max. delivery capacity: - 2,750 l/min at 8 bar / 3 m geodetic suction
    - 3,200 l/min at 10 bar / 3 m geodetic sauction
    Suction Inlet diameter of 125 mm
    Priming system: Magirus Primatic
    Weight: 57 kg
    fitted into the vehicle complete with inputs and outputs approx. 110 kg
  • MPN 350

    The pump sizes MPN 350, MPH 350 and MPN 700 are custom-produced for special fire fighting vehicles and airport crash tender with up to 10,000 l/min pump delivery capacity. All pumps are available in aluminium or bronze design.

    Available pump output of the MPN 350:

    • 10 bar - 4,000 l/min
    • 10 bar - 5,000 l/min
    • 15 bar - 3,000 l/min
    • 15 bar - 4,000 l/min
  • MPN 700

    The pump sizes MPN 350, MPH 350 and MPN 700 are custom-produced for special fire fighting vehicles and airport crash tender with up to 10,000 l/nin pump delivery capacity. All pumps are available in aluminium or bronze design.

    Available pump output of the MPN 700:

    • 10 bar - 5,000 l/min
    • 10 bar - 6,000 l/min
    • 10 bar - 7,000 l/min

MPH - High pressure

  • MPH 120 (Alu)

    MPH 120 (Alu)

    Available for standard vehicles like e.g. KLF, TSF-W, LF-HLF 10
    Max. delivery capacity: 1,950 l/min
    at 8 bar / 3 m geodetic suction
    Priming system: Magirus Primatic
  • MPH 230 (Alu)

    MPH 230 (Alu)

    Available for standard vehicles like e.g. LF 20, HLF 20 or TLF tank pumper
    Max. delivery capacity: 2,450 l/min at 8 bar / 3 m geodetic suction (inlet DN110, incl. rear or mid ship mounted pumps)
    3,000 l/min at 10 bar / 3 m geodetic suction (inlet DN125, incl. rear or mid ship mounted pumps)
    Priming system: Magirus Primatic

MAB - Series

  • MAB 200

    MAB 200

    The MAB 200 is a centrifugal type pump, four-stages on one axle, which can be used both simultaneously and independently in Medium and High pressure. Body and impellers are made of Bronze; the shaft is made of high grade stainless steel, with special graphite sealing rings, which does not need periodical maintenance.

    The pump can be fitted with either two or three-gear multiplying gear-box allowing an easy coupling to the vehicle Power Take Off and a low revolution rating of the propeller shaft.

    Pump Output:

    Medium Pressure: 2.000 lpm at 7 bars
    High Pressure: 360 lpm at 40 bars

    In its standard configuration the pump is complete with suction inlet of 4” from external source. The pump is also equipped with two outlets Ø 2 ½” for Medium pressure and two Ø 1 ½” for High pressure.

    High Pressure Curve
    Medium Pressure Curve

    Download as PDF

  • MAB 300

    MAB 300

    The MAB 300 is a four stage centrifugal pump which can be used both simultaneously and independently in Medium and High pressure. Body and impellers are made of Bronze; the shaft is made of high grade stainless steel, with special graphite sealing rings, which does not need periodical maintenance.

    The pump can be fitted with either two or three-gear multiplying gear-box allowing an easy coupling to the vehicle Power Take Off and a low revolution rating of the propeller shaft.

    Pump Output:

    Medium Pressure: 3.000 lpm at 10 bars
    High Pressure: 400 lpm at 40 bars

    In its standard configuration the pump is complete with suction inlet of 4” or 5” from external source. The pump is also equipped with four outlets dia. 2 ½” for Medium pressure and two dia. 1 ½” for High pressure.

    High Pressure Curve
    Medium Pressure Curve

    Download as PDF

Advantages & special features of the Magirus pump series

The concept of the Magirus pump series is based on modular design and therefore highly flexible. Depending on our customer’s needs, we offer solutions where the pumps can either be positioned at the rear or mounted as mid-ship pump. The pumps are compact, robust and have a strength-optimized construction. All centrifugal fire-fighting pumps are easy on the motor, low noise and environmentally friendly. Further advantages are its cavitation resistant design, high operational reliability and high suction capacity. Every pump comes with the fully automatic priming system Magirus Primatic and is easy to service and maintain as well as suitable for bilge and ballast pumping. Magirus pumps are waste water resistant, have compact dimensions and a low weight.

Monitors

  • Monitor IM 2 MVN

    Monitor IM 2 MVN

    Model                 IM 2 MVN (Multi Variable Nozzle)
    Location           on the top of the bodywork
    Typecombined for water and foam and equipped with Multi-purpose Variable Nozzle, with manually adjustable pattern from straight up to 120° spray stream, and suitable removable foam barrel.
    OutputStandard: 800 – 1200 – 1600 – 2400 lpm,
    Optional: 800 – 1200 – 1600 – 2400 - 3000 lpm, both manually selectable.
    Rangewater full stream: 50/55 m (Standard) - 60/65 m (Optional)
    foam full stream: 45/50 m (Standard) - 55/60 m (Optional)
    Coverage360°/ - 50° / + 75° (depending on roof profile)
    Controlmanual from the roof of the vehicle.
    Fittings

    separate stop cock, normal pressure manometer, engine throttle control.

    Monitor Performance Curve

    Download as PDF

High Pressure Hose Reel Unit

  • High Pressure Hose Reel Unit

    High Pressure Hose Reel Unit

    Type Magirus First-Aid hose reel (High pressure) – Type 38/60 -
    Fitting on the top of the bodywork
    Standard locationin the rear part of the vehicle, above the pump
    Construction                 hose reel with axle feed and emergency brake
    Rewinding system  manual by crank handle
    Fittings40 or 50 or 60 m of rubber semi-rigid hose Ø 1", ending with water branch pipe, plus foam adapter
    MAB 200pistol type PI-N-E18
    Output (each one)180 lt/min at 40 bar, Water range: 20 m
    MAB 300pistol type PI-N-E22
    Output (each one)200 lt/min at 40 bar, Water range: 25 m


    Download as PDF


Contact & Service

If you are interested in a quote or have questions about our products, please use the following contact button. We will get in touch with you as soon as possible. Your address and, when applicable, your fire brigade/agency/company will helps us respond to your inquiry quickly and efficiently. Of course we will handle your data confidentially.

 

Contact us